REMOVAL OF VARNISH COATING

CLEANER MAX




SPECIALIZED ACETONE-FREE AND CHLORINE-FREE PREPARATION FOR REMOVING MARKER INK, WAXES AND GRAFFITI



1. Intended use
Intended for removing marker ink, waxes and graffiti paints from metal, steel, aluminum, glass (trams), painted, PVC and terrazzo surfaces and other.

2. Properties
– highly efficient, breaks bonds keeping ink on surfaces;
– has very good penetrating properties as well as properties separating even longstanding inscriptions from various washable surfaces;
– can be diluted with water;
– fully biodegradable, does not require any utilization;
– has no harmful impact on surfaces made of metal, plastic, epoxy, vinyl, rubber and painted surfaces;
– does not dissolve paints;
– easy to rinse;
– does not cause corrosion of steel elements;
– does not contain evaporating solvents dangerous for human health, such as acetone, toluene, chlorides, hydrocarbons, etc.

3. Manner of application
– the most cost-saving way is to apply the preparation on a cleaning cloth and wipe the surface;
– can be used in temperatures below 0oC without losing its properties.


threelack




SET OF THREE PREPARATIONS FOR REMOVING VARNISH COATINGS



1. Intended use
Intended for complete removal of varnish coatings including powder, alkyd, acrylic and polyurethane paints, among others before reapplication.
ThreeLack ZN1 alkaline preparation
ThreeLack AB1 preparation based on alcohol solvents
ThreeLack TD1 based on new generation solvents (non-flammable, odourless)
ThreeLack GEL based on thickened solvents

2. Properties
– replaces hazardous solvents including dichloromethane, acetone, methanol – does not cause direct corrosion
– practically does not dissolve coatings, allows flaking
– softens the coating and separates it from the surface
– easy to apply, we use immersion or spraying
– high efficiency, does not cause extraction on the elements

3. Application

Method 1:
The element should be immersed in the preparation for 10-20 minutes until the coating swells. When the coating begins to swell, the element should be removed to dry, the coating should flake.

Method 2:
Use a brush or roller to apply the preparation on the surface, reaction time 30-40 minutes.
To increase the efficiency of the preparation, repeat the application of the agent on the surface depending on the thickness of the coating up to two times at intervals.


Top