DESCALING

beto clean




KONCENTRAT WODNY DO ROZPUSZCZANIA ZABRUDZEŃ I RESZTEK CEMENTU Z MASZYN I FORM



1. Przeznaczenie

Beto Clean jest preparatem na bazie kwasów organicznych przeznaczonym do usuwania pozostałości zestalonego cementu, betonu zapraw z różnego rodzaju powierzchni m.in. metali, stali itp. Preparat rozpuszcza zanieczyszczenia, które następnie można łatwo spłukać.

2. Właściwości

– rozpuszcza się w wodzie
– jest łatwy do spłukania
– rozpuszcza m.in. osady z cementu, kamień wapienny i kotłowy

3. Sposób użycia

– rozcieńczyć z wodą w zależności o grubości zabrudzenia od 1:1 do 1:5
– nanieść rozcieńczony preparat na powierzchnię przez natrysk lub pędzlem
– po rozpuszczeniu spłukać wodą
– ciepła woda może przyspieszyć rozpuszczanie
– rozpuszczanie osadów i nalotów z betonu czy kamienia może powodować lekkie gazowanie kąpieli – zużytą kąpiel / popłuczyny najlepiej unieszkodliwiać mleczkiem wapiennym do pH 5-8
– należy używać okularów i rękawic ochronnych


SCAL PRO SC




STRONG PREPARATION DISSOLVING STONE AND DEPOSITS BASED ON MINERAL ACIDS



1. Intended use
Strong dissolving preparation based on specially selected admixtures of acids, inhibitors and additives of enhanced performance, used mostly to remove significant boiler scale deposits of lime, carbonate and siliceous origin in closed water circuits, industrial cooling and heating installations, heat exchangers, JADs and water and sewage installations. Perfect for removing organic deposits from closed circuit installations.

Preparation dissolves both, organic and inorganic deposits and demonstrates strong performance even in ambient temperatures. Do not use on galvanized elements!

2. Application
Dosage depends on the size of lime scale or rust deposits.

In case of large deposits, use preparation in concentrations of 1:5 to 1:20.
In case of regular flushing of installation, a concentration of 1:20 to 1:40 can be applied.

Fill the installation intended for cleaning with prepared solution of relevant concentration and leave for app. 8 hours. The agents dissolves the lime scale deposits and penetrates installations the best when the solution circulates freely inside the installation, hence it is recommended to use the preparation in closed circuit with forced circulation.

After washing, remove the emulsion from the installation and flush it with water for app. 15 min.


SCAL PRO GKF




STRONG PREPARATION DISSOLVING STONE AND DEPOSITS BASED ON ORGANIC AND FOOD ACIDS



1. Intended use
Strong dissolving preparation based on specially selected admixtures of acids, inhibitors and strengthened complement compounds, used primarily to remove significant lime scale, carbonate and silicate deposits in water closed circuits, industrial cooling and heating installations, heat exchangers, weirs and water and sewage systems.

Perfect for removing organic deposits in closed circuit installations.
The preparation dissolves both organic and inorganic deposits and shows a strong effect at ambient temperature

2. Application
Dosage depends on the size of lime scale or rust deposits.
In case of large deposits, use preparation in concentrations of 1:10 to 1:30.
In case of regular flushing of installation, a concentration of 1:50 to 1:100 can be applied. Can be applied on galvanized elements in a dilution above 1:20

Fill the installation intended for cleaning with prepared solution of relevant concentration and leave for app. 4- 8 hours. The agents dissolves the lime scale deposits and penetrates installations the best when the solution circulates freely inside the installation, hence it is recommended to use the preparation in closed circuit with forced circulation.

After washing, remove the emulsion from the installation and flush it with water for app. 15 min.


Top